TRAJECTORY PLANNING AND SIMULATION OF A 6-DOF ROBOTIC MANIPULATOR
DOI:
https://doi.org/10.18623/rvd.v23.6446Palavras-chave:
Trajectory Planning, Robotic Manipulator, Inverse Kinematics, Obstacle AvoidanceResumo
This study presents the modelling, simulation, and validation of trajectory planning for a six-degree-of-freedom (6-DOF) robotic manipulator operating in constrained industrial environments. Linear, circular, and helical trajectories were generated and analyzed in Cartesian and joint spaces using the Denavit–Hartenberg formulation and Paul’s analytical inverse kinematic method. To improve motion smoothness and reduce actuator stress, polynomial interpolation techniques were implemented and compared. Quintic interpolation reduced jerk peaks by approximately 68% compared with cubic interpolation while maintaining stable velocity and acceleration profiles. An obstacle-avoidance strategy based on a cylindrical obstacle was also introduced along the helical trajectory. Simulations performed using MATLAB and SolidWorks demonstrated smooth and continuous robot motion without singularities or abrupt deviations. Validation against reference robotic models showed excellent agreement with published results, with a root mean square error (RMSE) below 1.2×10−4 rad and an average computation time lower than 0.015 s per trajectory point. The proposed methodology provides accurate and collision-free trajectory planning suitable for advanced robotic applications such as welding, drilling, and automated assembly.
Referências
Corke, P. (2017). Robotics, vision and control: Fundamental algorithms in MATLAB (2nd ed.). Springer.
Craig, J. J. (2018). Introduction to robotics: Mechanics and control (4th ed.). Pearson.
Denavit, J., & Hartenberg, R. S. (1955). A kinematic notation for lower-pair mechanisms based on matrices. ASME Journal of Applied Mechanics, 22(2), 215–221. https://doi.org/10.1115/1.4011045
Khatib, O. (1986). Real-time obstacle avoidance for manipulators and mobile robots. The International Journal of Robotics Research, 5(1), 90–98.
Macfarlane, S., & Croft, E. A. (2003). Jerk-bounded manipulator trajectory planning: Design for real-time applications. IEEE Transactions on Robotics and Automation, 19(1), 42–52.
Paul, R. P. (1981). Robot manipulators: Mathematics, programming, and control. MIT Press.
Siciliano, B., Sciavicco, L., Villani, L., & Oriolo, G. (2010). Robotics: Modelling, planning and control. Springer.
Spong, M. W., Hutchinson, S., & Vidyasagar, M. (2006). Robot modeling and control. Wiley.
Wang, T., Zhang, Y., & Li, H. (2022). Smooth trajectory generation and obstacle avoidance for industrial robotic manipulators using adaptive optimization methods. Robotics and Computer-Integrated Manufacturing, 74, Article 102289.
Zhao, X., Chen, Y., & Liu, P. (2024). Real-time trajectory planning for redundant robotic manipulators in constrained industrial environments. IEEE Access, 12, 45872–45889.
Downloads
Publicado
Como Citar
Edição
Seção
Licença
Submeto (emos) o presente trabalho, texto original e inédito, de minha (nossa) autoria, à avaliação de Veredas do Direito - Revista de Direito, e concordo (amos) que os direitos autorais a ele referentes se tornem propriedade exclusiva da Revista Veredas, sendo vedada qualquer reprodução total ou parcial, em qualquer outra parte ou outro meio de divulgação impresso ou eletrônico, dissociado de Veredas do Direito, sem que a necessária e prévia autorização seja solicitada por escrito e obtida junto ao Editor-gerente. Declaro (amos) ainda que não existe conflito de interesse entre o tema abordado, o (s) autor (es) e empresas, instituições ou indivíduos.
Reconheço (Reconhecemos) ainda que Veredas está licenciada sob uma LICENÇA CREATIVE COMMONS:
Licença Creative Commons Attribution 3.0
